Sharp vcr problem

Hi I have a older vcr, model h813u, I cant get the vcr to record off a cable box, I have put both the cable box and tv on 3, and I then put the channel I want to tape on the vcr, it doesnt work. Any suggestions?

The way to connect them is as follows:

1. Connect the cable from the wall to the cable input on the cable box.

2. Connect the cable box RF output to VCR RF input (VCR must be on channel 3).

3. Connect the RF output from the VCR to the RF input on your TV (TV must be on channel 3).

After all the connections are done, leave the VCR and TV on channel 3 and use the cable box to select the channel you want to record programs from.

Good Luck.

Posted on

More: