Connecting a guitar amp to a mixer amp

Hi
I have a Behringer ACX 900 acoustic amp which I would like to connect it to my Phonic powerpod K12 Plus mixer/amp
The Behringer as 2x balanced line outputs (XLR) with a built in DI box.
Please could you advise me how to do this.
Thanks.
Cliff.

Hi cliff

Connect either of the XLR DI output of the Behringer directly to a MIC IN channel on the Powerpod using a standard Microphone cable. If you wish to push a stereo sound then connect both(L + R) of the XLR DI outputs from the amp... that's about all you need to do. The only reason you need to use stereo(both XLR Outs) from the Behringer is if you want a full stereo FX output from the amp, otherwise you can get away with 1 connected. You may need to back the gain off for those channels on the power pod. You can get a manual for the Powerpod from here

and user manual for the acx900 here

Hope this has helped you, If not, feel free to ask any questions. Cheers.

regards
robotek

Posted on

More: