Sharp AR 5316

I have a sharp copier AR 5316 shows error H2 when turned on. what is the error?

It worked thanks alot.

All I did was to press the #,interrupt,c,interrupt in sequence. The display then went off.

I then press the numeric keypad 1,4 and start botton in sequence.



It's fine now.

A big thanks

Ometan Goodluck



Nigeria

It worked thanks alot.

All I did was to press the #,interrupt,c,interrupt in sequence. The display then went off.

I then press the numeric keypad 1,4 and start botton in sequence.



It's fine now.

A big thanks

Ometan Goodluck

Nigeria

There might be some dirt on thermistor above the heater upper roller pls check and clean the fuser unit then use simulation 14 to reset the machine enter simulation by presssing #,interrupt,c,interrupt in sequence display is then off, then no. 14 then start key h2 disappears ok

Posted on

More: