Sharp microwave R1050

Outside door cracked. Will I have to replace total door?

We have
the service / repair manual for this model and have uploaded it to our
site here to help you.

It will give you safety info, step by step help in disassembly, troubleshooting tips, and even part numbers.

Most computers will open this document automatically, but you may need the free Adobe Reader.

You can order parts from Encompass here or you can call them toll-free at 866-779-5835.

We're
happy to help you with free advice and we'd appreciate your
thoughtful rating of our answer.

The door comes off in a very simple way. Now...I'm speaking from the perspective of MOST microwave ovens. All you should have to do is open the door all the way to the left and lift straight up. The door has mounting pins that fit into a couple of hinge pin holes. If your oven is equipped with an upper panel grid, you may have to remove it, so the door will have more clearance. Putting the new door on is just as simple as lining up the pins in the door with the hinge pin holes and setting the door in place. Close the door slowly to make sure the pins are aligned with the holes properly. If not, the door will fall off while attempting to close. Let me know if this is helpful to you.

You can order separate panels for the door as opposed to whole door, assuming they are still available.

We have
the service / repair manuals for this model and have uploaded them to our
site here and here to help you.

They will give you safety info, step by step help in disassembly, troubleshooting tips, and part numbers.

Most computers will open this document automatically, but you may need the free Adobe Reader

You can order parts from Encompass here or you can call them toll-free at 866-779-5835.

We're
happy to help you with free advice and we'd appreciate your
thoughtful rating of our answer.

Posted on

More: