Convergence off on Digital Cable

I have a RCA D52W20 52 in. Rear Projection HDTV-Ready Television, and when I use the digital cable, the convergence is off, and it's even worse on HD channels. The convergence is fine on regular cable. I even tried swapping my cable box. Any suggestions would be greatly appreciated.

Convergence for the rca itc222 is set individually for digital and analog tuner. Most of time the set will have to be converge in service mode. as a tech i would not recommend getting intoservice mode. but the key is the the convergence has to be set indiviadually for each tuner. You could try autoconverging in digital or even manualy converging

Posted on