2004 Kawasaki Vulcan 1500 Nomad how do I adjust the shocks

How do I adjust the shocks on my 2004 Kawasaki 1500 nomad @

on the bottom chrome band there are like four holes. in your tool kit there is a "thing-a-ma-gidgette" (i call it this because it looks like one, it is actually a "spoke wrench"). the tail of the spoke wrench will fit in the 4 holes Righty tighty so it feels weird: one side you are turning towards the front one side towards the back.

I hope you have a jack... I had to remove the pipes and bags on my 04 vulcan nomad so I remove the cotter pin and pull the axle out of the rear hub. Then removed the spcer and rear brake. slide wheel assy. out of the drive hud on the left (removal of brake and spacer allow this) and drop the tire down. It's not hard...

should have a big spring nut to tighten the spring or to loosen it.how ever you want it the tighter the stiffer the shock gets loosen it softer it gets

Ok, locate and check the fuse at the starter solenoide, this is the main power fuse, follow the red battery lead until you locate the solenoide, here you should find under a cover a 30 amp fuse, hope this helps , paul

Hi, Teryy418 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.

For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.

http://www.kawasakimotorcycle.org/forum/kawasaki-cruisers/55102-new-here-vulcan-1500-classic-adjustable-rear-shocks.html

Suspension Adjustment Kawasaki Vulcan Forum Vulcan Forums Kawasaki Vulcan 1500 Classic Fi Service Manual

OEM Parts for Kawasaki

2003 Kawasaki Vulcan 1500 Classic Owner Manual

Posted on

More: