Hello, I recently purchased a Ford fiesta 2012 I want to replace the stereo to put a sound system (amp,etc), I saw kits to put a single din radio but I want to know if there's a stereo of the same type the car have but better.

Here it is.



1996 Ford Explorer Car Stereo Radio Wiring Diagram

Car Radio Constant 12v+ Wire: Green/Violet
Car Radio Switched 12v+ Wire: Yellow/Black
Car Radio Ground Wire: Black/Light Green
Car Radio Illumination Wire: Light Blue/Red
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger: Orange/Blue
Car Stereo Amp Trigger Wire: Blue (If Equipped)
Car Stereo Amplifier Location: N/A
Front Speakers Size: N/A
Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Orange/Light Green
Left Front Speaker Negative Wire (-): Light Blue/White
Right Front Speaker Positive Wire (+): White/Light Green
Right Front Speaker Negative Wire (-): Dark Green/Orange
Rear Speakers Size: N/A
Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Gray/Light Blue
Left Rear Speaker Negative Wire (-): Tan/Yellow
Right Rear Speaker Positive Wire (+): Orange/Red
Right Rear Speaker Negative Wire (-): Brown/Pink


-->

why not put a belson car radio that uses a sd chip card and a usb connection ,a 1gb sd card is about 30 cds so why mess about with the cd changer ,old technology ,would you put an 8track in it ?? or a mobile vinyl 45 record player

Hi,


I had the same problem and ive been searching through the net for the solution, just came across one now but i havent gone out to the car to try, will do when i go out as my car is parked miles away (parking in London :S) anyway, thought i give u the solution i found, give it a go :)


"for the 1st digit press preset one repeatedly till the digit shows, repeat for the other 3 with presets 2,3&4 , once the code is displayed on the screen press 5

hey presto code entered"



Hope it works (fingers crossed)

i have a 2002 ford escape and i bought a double din radio and it did not fit and found out it is actually a din and 3/4 with out serious mods (cutting a bigger hole in dash) double din wont fit i bought a single din stereo and a din a 3/4 dash kit works fine

you have to get the cable that conects your factory deck harness to the aftermarket deck, and that will allow you to use your factory speakers and amp, the wire harness is availiable at canadian tire or any stereo shop

Posted on

More: